MultiCyclone Pre-filtration Filters
Reduce Filter Maintenance and Save Water
Waterco supply the MultiCyclone centrifugal water filtration
system that has no filter media to clean or replace.
The MultiCyclone pre-filtration device is capable of saving water
and reducing filter maintenance by lessening the frequency of
particle filters' back flushes.
The MultiCyclone works on the basis of centrifugal water filtration.
There are no moving parts to wear and tear, and no filter media
to clean or replace.
- Swimming pool pre-filtration
- Dairy industry water filtration
- Industrial water treatment
Centrifugal Filtration Method:
Incoming water enters 16 hydro cyclones tangentially,
generating a strong centrifugal effect.
The sediment is spun out to the hydro cyclones
wall, and then spirals down to the sediment bowl.
The filtered water migrates towards the center
of the hydro cyclone where the flow reverses and spirals upwards
through the outlet.
Accumulation of sediment can be visibly monitored
through the MultiCyclone clear sediment bowl.
The MultiCyclone is easily cleaned by opening the
valve - only 15 litres of water is discharged in cleansing.
- Using a MultiCyclone plus sand (granular) filter gives a
reduction in backwash frequency
- Extends the life of the filter media
- The reduction in backwash frequency of a sand filter could
result in the savings of up to 5,000 litres of water per year
for an average domestic swimming pool.
The MultiCyclone was field tested on an outdoor swimming pool
and the contents of its sediment bowl were laboratory tested.
The test revealed that the Multi Cyclone was capable of trapping
sediment between 10 to 100 microns.
Waterco (NZ) Ltd
||+64 (9) 525 7570
||+64 (9) 525 6580
||7 Industry Road, Penrose, Auckland, New Zealand
||(53 or Phone Supplier
to Ralenti Management Ltd 1996 all rights reserved